
SignalFire splicers · supplied worldwide by HiLink
Fusion splicers that keep fibre crews moving
Six core-alignment machines, from 8-second FTTH workhorses to 0.05 µm backbone splicers — with OPM, VFL and an electric cleaver already in the case.
- 5 sfastest splice
- 0.05 µmalignment accuracy
- 260splices per charge
- 3–5 yrunit warranty

AI-9
5 s splice · 15 s heat · OPM + VFL · 260 splices per charge
The range
Choose by project, not by spec sheet
Every model shares the same 6-motor core-alignment platform, 3-in-1 fibre holder and Bluetooth record keeping. What changes is speed, alignment accuracy and battery capacity.
Need help choosing? Tell us the fibre type and span length — we answer with a model recommendation, not a catalogue dump.
Where they work
Match the machine to the job
FTTH & security
Drop cable, pigtail and CCTV runs where crews need a light, fast machine at the lowest cost per splice.
Metro & trunk
Medium to long spans where loss budget matters and a five-year warranty keeps the fleet running.
Backbone & long haul
High-count backbone and emergency restoration, with an electric cleaver and 0.05 µm alignment.
Built for the field
Fewer instruments in the van
6-motor core alignment
Two cameras and six motors align the core itself, not just the cladding — 0.05 µm on the AI-12 and AI-30.
OPM and VFL on board
Measure link loss at ten wavelengths and trace faults with a 15 mW visual fault locator, without a second kit.
7800 mAh, 160–260 splices
One charge covers a full day of drop work. Removable pack, three charging ports on the AI-12.
Water, dust and drop tested
Sealed body with a thickened buffer structure, rated for −15 to +50 °C, 0–5000 m and 95 % humidity.
In the case
Everything needed for the first splice
Each splicer ships as a working kit: cleaver, stripping tools, alcohol bottle, spare electrodes, calibration fibre and manual, packed in a hard case with a shoulder strap.
- Splicer main unit and 7800 / 5200 mAh battery
- High-precision fibre cleaver and 3-in-1 holder
- Miller stripper, wire stripping pliers, alcohol bottle
- Spare electrodes and arc calibration fibre
- Charger, shoulder strap, user manual and warranty card

Questions
Before you specify
Which splicer should I buy for FTTH and CCTV work?
The AI-5 Pro and AI-6A+ are the value pair for drop cable, pigtail and short-span work. The AI-6A+ adds a touchscreen, 0.3 µm core alignment and 11 languages for about the same weight and battery life.
How fast are these splicers, really?
Splice and heat times quoted by the manufacturer are 8 s / 18 s on the AI-5 Pro and AI-6A+, 5 s / 15 s on the AI-9, and 6 s / 15 s on the AI-12, AI-20 and AI-30. Real numbers depend on fibre type, cleave quality and the heating programme you select.
Do the machines include an OPM and VFL?
AI-6A+, AI-9, AI-12, AI-20 and AI-30 have a built-in optical power meter and visual fault locator. The AI-5 Pro is a splice-and-heat machine only.
What is covered by the warranty?
The main unit carries 3 years on the AI-5 Pro and AI-6A+, and 5 years on the AI-9, AI-12, AI-20 and AI-30. Battery, power adapter and consumables such as electrodes and cleaver blades carry 1 year or wear-based cover.
How do I get pricing?
Add the models you need to the quote list, then send one request. We reply with pricing, lead time and shipping options within one business day.
Send one request, get a full quote
Add every model you are comparing to the quote list — quantities, accessories and shipping included.





