Which splicer for which job

The six models differ mainly in alignment accuracy, splice speed and battery capacity. Here is how that maps onto the work your crews actually do.

FTTH and FTTx drop work

Drop cable, pigtail and indoor patch work at volume. Crews want light machines, fast heat cycles and a holder that takes flat drop cable without swapping fixtures.

AI-5 ProAI-6A+

Security and CCTV networks

Short runs between cameras, poles and cabinets. Splice counts are low but sites are many, so cost per machine and battery independence matter more than alignment accuracy.

AI-5 ProAI-6A+

Metro and trunk lines

Medium to long spans where every 0.01 dB counts. Look for lower splice loss, better alignment accuracy and a battery that lasts a full shift in the manhole.

AI-9AI-12

Backbone and long-haul construction

High-count backbone, G.654 long-haul fibre and scheduled construction. An electric cleaver and luminous-flux alignment help hold loss budgets over hundreds of kilometres.

AI-20AI-30

Emergency restoration

Storm damage, cut cables and night call-outs. Built-in lighting, a hot-swappable battery and one-second boot get a link back up before the crew leaves site.

AI-9AI-30

Data centre and indoor fibre

High-density patching, MPO breakouts and short indoor runs where portability and clean splice records matter as much as speed.

AI-6A+AI-12

Does alignment accuracy change the splice you get?

Core alignment matters most on single-mode fibre with tight loss budgets. A 0.5 µm machine will still produce a working splice on G.652 drop cable; it just gives the arc less help on long-haul spans where a 0.05 dB difference per splice multiplies across hundreds of joints. That is why the AI-5 Pro is specified for short runs and the AI-12 or AI-30 for backbone work — not because one machine is "better", but because the loss budget is different.

What about the cleaver?

A poor cleave ruins a good splice. Every model ships with a precision cleaver, and the AI-20 and AI-30 include an electric one-step cleaver in the case. Replace blades on schedule — it is the cheapest reliability upgrade on any splicing kit.

Compare all six models →

Tell us the job, we will name the model

Fibre type, span length, splices per day and where the crews work is enough for a recommendation.